How to Use a Torque Wrench?
becoming increasingly important to use a
torque wrench when working on your bike
particularly there’s more and more
superlight carbon and alloy parts get
introduced onto the bikes that we ride
gone are the days and you just used to
be able to lean on a bolt to tighten it
up so why is it important well over
timing or under tightening your bolts
can be really dangerous under timing we
can clearly see why because it’s
sensitive that’s just stuff coming loose
but over tightening can be just as bad
for example if you over tighten your
stem bolts up here apparently that’s the
biggest cause for carbon handlebar
failure so you can clearly see that it
is really really important but
furthermore if you over tighten the bolt
and you do break something that part is
then going to be outside the
manufacturers warranty and all
likelihood so it’s going to be a costly
mistake to make so you need a torque
wrench clearly but how do you use one
well if you have a look around your bike
you’ll see loads of little numbers all
over it followed by either the letters
nm which stands for Newton meters or
pounds per foot
so they refer to generally the maximum
recommended torque although you probably
should check either in the manual that
came with the component or indeed just
online to find out whether it is the
maximum torque or the recommended talk
generally if it’s the maximum torque you
should then reduce that figure by about
15 to 20 percent so in the case of our
stem bolt up here as five Newton meters
so on my torque wrench I’ll set it to
four which is obviously 20% less than by
now it’s important that you hold your
torque wrench in the right place it’s
pretty clear you just hold it on the
handle don’t hold it up here because
you’ve effectively choked the torque
wrench and it won’t work properly and
then when it gets the recommended talk
they go that’s it
it’s as simple as that well it’s just
not quite as simple as that
now when you finish using your torque
wrench you should always back it off to
virtually zero not completely zero but
pretty much and that means that it stays
calibrated for longer now there are a
few different types of torque wrenches
on the market this is an example of one
that’s quite high-end
it’s got an internal clutch mechanism
which we’ve just seen it in action and
then obviously the dial there it’s also
a slightly cheaper but just as effective
Eyebeam torque wrench where you have to
be a little bit more careful it won’t
tell you when you get to the right talk
you have to actually look at it on there
but again it works brilliantly and then
now I see because of the sheer
importance of torque wrenches a lot of
manufacturers are also supplying them
with bikes so this one here as she comes
with a trek bike it’s set just to five
Newton meters so that when you’re
tightening up I think in this case it’s
the C clamp that you don’t over tighten
it and it works in exactly the same way
as the other one okay job done it’s
worth mentioning that to avoid
recalibrating your torque wrench too
much and don’t use it to loosen bolts
just use it to time it’s a small thing
but might make a difference so there’s
our torque wrench basics but to use it
really accurately we also need to pay
close attention on how we prepare the
bolts and also the clamping surfaces now
when you are preparing bolts there’s
three main ways you’ll do it you can
either grease the thread or you can put
a thread locking compound on the thread
or it goes in dry now this is really
important grease or thread lock both
effectively lubricate the bolt which
transfers more torque to the clamp as
less energy is lost as friction so you
need to pay close attention to the
manufacturers recommendations as to
whether they say that you put the bolt
in lubricated or dry effectively if you
talk a bolt that’s lubricated up to the
dry specifications you’re just going to
be over tightening it which is yet
another reason why you don’t talk
anything to them recommended maximum
settings because you give that little
bit of leeway
the other thing is to pay attention to
the surfaces that you’re clamping if for
example it’s handlebar or a seat post
you want to apply it fiber grip which is
a slightly abrasive paste that
effectively increases the friction
between the surfaces that you’re
clamping what that means therefore is
that it’s less likely to slip
particularly key with handlebars and
seat posts and therefore you don’t need
to overtalk the bolt in order to prevent
it moving now some of you will say you
should put fiber group on any of these
parts we say only if they’re either both
carbon or ones alloy on one’s carbon and
that’s in line with most manufacturers
that we spoke to one place you shouldn’t
use fiber grip so we’re told is on the
steerer tube there use it too much and
over time you’ll actually damage the
steerer so stay safe or pay attention
that to the torque specs on your bike
and use a torque wrench then it’s just a
case of paying attention it to the
preparation of your bolts and also the
clamping surfaces to make sure the
torque specification is accurate and
also you don’t get any slippage worth
bearing in mind all indexing is done
using that barrel adjuster there so once
the limit screws are set we leave them
be so everything now is just going to be
here okay so we
| # | Preview | Product | Rating | Price | |
|---|---|---|---|---|---|
| 1 |  | Performance Tool W1173 SAE/Metric 40-Piece SAE and Metric Socket Set, 1/4-Inch & 3/8-Inch Drive... | $12.74 | Buy Now |
Bicycle Torque Wrench Review
There is no denying that the bicycle torque wrench, or the bike’s gearing, is an essential component to riding your bike. Having the correct gearing on a bicycle can ensure that you are pedaling properly and staying within the limits of the bike’s suspension.
If the bike you have been riding does not have the proper amount of gearing, then you will be experiencing problems and difficulties along the way. The first thing you should know is that the bike’s gearing will depend on how many gears the pedals are in. If you have a lower gear than the wheels and handlebars, then your bike will likely be lacking torque.
A lower ratio means that you will have to pedal harder to make the speed of your bicycle travel at an appropriate level. The higher the pedal ratio, the less likely it is for you to encounter any problems while pedaling.
You need to know that if the pedals you are riding have the wrong kind of gearing, then they will be difficult to turn and handle. This could lead to difficulty climbing hills, especially steep hills.
Many newer bicycles come with a system called “free-wheeling” technology, which means that all the gears can be turned with the same pressure. This is especially advantageous in mountain bikes. This allows you to use just one hand to pedal the bike and you will be able to reach the maximum height possible. This can be particularly beneficial when you are going uphill, because you can turn the front wheel with one hand, so that you do not have to exert as much force while pedaling.
Once you find the right gear for your bike, you should know that you have to adjust your bike’s pedal ratio to the right level to keep your bike in good working condition. In fact, you may find that there are other options for your bike to provide you with more torque, such as a larger chain, but these will all require that you have your bike in the proper gearing.
If you have problems with your bike’s suspension or shocks, you will also want to make sure that you are using the proper shocks and tires to improve the performance of the bike. If the tires are too small, the bike will probably be hard on your legs when you are climbing. If the tire is too big, then the bike will be too hard on your back and you will experience a lot of fatigue in your upper body when you are riding.
To find the right tire size for your bicycle, you should consult your bike’s manual to determine the appropriate size. When you have a good idea of the correct tire size, you can go to your local bicycle store and get a wheel, and a set of tires to match your size. Then, you should try them out on your bike for a while to determine if they feel right for you.
If you have the right tire size, you can also consider changing your fork and seat to give you an even larger radius, in order to give you an even more comfortable ride. This will also help you stay more upright while pedaling. With a little work, you can improve your bicycle’s riding performance.
Bike Torque Wrench FAQ
When it comes to getting the best deals on torque wrenches, it is important that you know what to look for when shopping for them. When you are looking for a torque wrench for your motorcycle, it is important that you understand exactly how the wrench works and why it is so accurate. While the price of the wrench might be the main consideration when purchasing one, the quality of the wrench is just as important. There are plenty of online stores that offer high-quality torque wrenches at affordable prices, but there are also lots of stores that offer extras that aren’t really necessary in order to get an accurate wrench.
When you are considering the many different sizes of torque wrenches available, make sure that you understand the differences between each size. For example, if you are only working with one flat surface, it is a lot easier to secure a smaller-sized wrench compared to trying to secure one that is made for multiple surface use. There are even some online stores that offer the same tools in different sizes and that will allow you to choose the one that you need based on the job at hand. Whether you are doing a simple maintenance task or you are looking for a replacement part, it is important to choose the right size of wrench so that you get the most accurate readings and the greatest amount of torque.
Torque wrenches can make a huge difference in your ability to work on your bike. Whether you are looking for the best torque wrench for motorcycle repair or you are purchasing a used tool, make sure that you are purchasing the right size and accuracy level based on your work needs. There are plenty of online stores that offer many of the same tools in different sizes, which will help you to easily compare the features and the price of each wrench so that you will be able to find the perfect tool for your budget.
You may want to consider getting a torque wrench for mountain bike maintenance. If you have a bike, you most likely use it a lot and it can be a little tough to tighten your bike’s nuts when you’re not in the habit of regularly checking your bike. You can tighten your bike’s nuts by hand every now and then, but if you’re doing it more often, then a torque wrench can help make it easier to do. torque wrenches usually have a small ball inside of them that can allow you to rotate it freely by hand. This is much better than trying to tighten the nuts on a standard wrench.
If your bike has a heavy duty or really long crank arm, you may need a torque wrench. The reason is that a long crank arm can easily damage the threads on your bike’s crank arm. This can cause the chain to slip and cause a problem if you’re not careful. If you can’t seem to get the chain to move far enough into the cassette without it slipping off, then you probably need a torque wrench.
A torque wrench is definitely something that you should get for your mountain bike if you frequently use it. It will save you a lot of time and it will also make tightening your bike’s nuts much easier. It’s important that you know what type of bike you have though. You don’t want to use a torque wrench for a bike that doesn’t have the same type of crank that your bike uses.
The 1/4″ Torsion Torque wrench for dirt bikes is arguably the most reliable torque wrench for dirt bikes, and all other variety of various uses. It is extremely accurate and boasts an amazing range of handy uses including transportability, convenient design, and great accuracy. The tool allows you to easily perform light and moderate tightening/loosening of the bolt that binds your tire bead to the rim. You can also use it to secure or loosen some of the other parts that are mounted on your bike, such as your chains, rear derailleurs, and even your bottom bracket. This amazing tool can even be used to repair some of the common problems that you may encounter while riding your Dirt Bike.
For all the people who plan to ride their dirt bike on a regular basis, the 1/2″ Torsion torque wrench will prove to be an indispensable part of their motocross or dirt biker equipment. The tool allows you to tighten and loosen the nuts that secure your chain to the frame of your dirt bike. The smaller size of this tool allows you to tighten and loosen the smallest of bolts without having to pound it into place. You can also use it to secure or loosen the front derailleur bolt which is used for controlling the back derailleur.
If you enjoy riding your dirt bike, you should know how important it is to maintain it in top shape and in working order. For this, you need to make sure that you have a torque wrench that is precise enough for your needs. For this, it is better to choose a precise unit that comes with high torque settings. Most of these units give you accurate torque settings which are necessary for performing your bike’s repair task accurately. It is always advisable to go for high-quality equipment for better results. Also consider using a torque wrench which has anti-slip grips to avoid slipping and falling while using the instrument.
The torque wrench is the handy tool to have if you have a bike that is made of carbon fiber. If you are not familiar with the tool, you should know that it is a very powerful wrench that is used to tighten and loosen the bolts that hold your bicycle wheels in place. This is the most important tool that you should have because if you do not use one, your bike will not function properly. You should make sure that you have a tool with a tapered head to help you get a good tightening grip on the bolt that is holding your wheels in place. There are also different types of these tools and the type that you get depends on the type of bike that you have.
If you have a Harley Davidson for example, then you need to get a different type of wrench than one that is used for a BMW or a Lamborghini. Even though they may look similar, there are many differences between the bikes and their respective wheel holders. When it comes to fixing your bike, the torque wrench is the only tool that you should have because it is the only way to tighten or loosen the set of wheels that hold your bike up. Before you decide to purchase a new one, you should take the time to check the torque and strength of the wrench that you have so that you can ensure that you get the best quality that you can.
There are many benefits of using the torque wrench for carbon fiber bike. It is one of the most powerful tools that you will find. This means that it is also one of the most dangerous because you could literally drop the bike if you do not have the right kind of tool for the job. If you want to be safe, you should invest in one of the better torque wrench kits because they will give you the power that you need and the safety that you need. These kits are designed specifically so that they can handle bikes of different weight as well as sizes. If you are looking for a way to revamp the look of your bike and add some performance features, then a torque wrench is the way to go.
Last update on 2023-01-13 / Disclaimer: as an Amazon Associate I earn from qualifying purchases.
3 verified buyer reviews
I bought one of these because of its small size and the fact that the BMW GS has over 1000 screws and bolts, all with very precise torque specifications. Also removing the air filter necessitates the use of five Torx screws, two of which are different sizes and have different torque specifications. So, with that in mind, I immediately checked this little guy against a more expensive / less portable digital torque wrench and was blown away by its accuracy. The carrying case is small enough to fit in my gear bag for when I’m out on the road.
That little piece of mind knowing that everything is properly torqued is priceless to me! We’ll see how well this holds up over time, but first impressions are promising.
This has been fantastic so far! So far, I’ve just used it a few times. The fact that it comes with the sockets you’ll most likely need makes it a good buy for the price. Only what I wanted to work on my carbon bike. It appears to be of high quality. It came with a conversion chart from Nm to in/lbs, as well as a certificate containing the test results and percent +/- variance. It’s pretty similar, but I erred on the side of caution. So, if you’re unsure, set it just a tad lower than your preferred environment. For eg, when a 4nm was measured, the actual reading was 4.16. The real reading was 10.28 when measured at 10nm. I can’t give it five stars for two reasons:
1) The correction is not precise. For eg, it has markings for 12nm and 14nm, so if you have a torque specification of 13.2nm, you must guess. It’s not a big deal, but it’s worth noting.
2) You can change the handle by twisting it, but there is no way to lock it in place. As a result, if you’re not careful, you might unintentionally change the setting while it’s in use.
Always a good product.
I’d been looking for a torque wrench for a while, but I’d either come across an overpriced brand or a cheap but untrustworthy brand. I’m relieved that Pro Bike Tool has finally produced what I need. I’ve been using the Pro Bike tool brand for quite some time now, and I’m confident in the quality that they produce. I highly recommend pro bike tool to all of my mountain biking teammates, and it comes with excellent customer service. Keep up the good work, and create more cycling-specific tools.
The torque wrench works admirably. Since I began riding, I have never used a bike-specific torque wrench. To torque down my bits, I depend on how much grunt I need. However, now that I have carbon bits, torque is extremely important. The torque wrench is well-made, with clearly defined numbers, a pull down lock/unlock mechanism, and it locks in place. It also includes a manual with a torque conversion table for Nm to lbs, which is very useful.
* only verified buyers can leave a review.