Simple MTB Bike Stand Demo Video
in this video I’m gonna be showing you
guys how I made these nice decorative
bike stands for around $20 Mike at Frank
loves to just pop my bike and will
oftentimes knock it over so I had to
come up with something and this is what
I had come up with like many modern
mountain bikes my bike is equipped with
a hollow crank spindle so the first
thing we’ll have to do is to measure our
spindle and to do this you can use a
measuring tape your finger or a
micrometer which is what I used and
we’ll also need to measure the height of
the crack spindle or the bottom bracket
to the floor now that we’ve got our
measurements it’s time to take a trip
down to our local hardware store for the
materials we’re going to need for this
project we’re gonna head to the plumbing
section because we’re using cast black
iron pipe commonly used for plumbing
natural gas and propane it’s cheap it
comes pre threaded and it’s easy to work
with we’re also going to need some
screws and some wood for our base I
chose to use a seven and a half inch
wide pine stair riser because it was
smooth on both sides 48 inches long so
that I could cut it down to 16 inches
and make three stands I’ve got a saw at
home but if you don’t some hardware
stores can cut it for you if you ask
them nicely now that we’ve got
everything that we need let’s get
started
begin with laying out all the pieces
based off the measurements taken earlier
I got one 12 inch long piece of
half-inch pipe one six inch piece of
half-inch pipe a ninety degree elbow and
a half inch floor flange using a
measuring tape find the center of your
base our base is seven and a half inches
wide so divide that in half and we get
three and three-quarter inches then take
your measuring tape and make a mark
three inches down from the end of the
board this doesn’t have to be perfect
and feel free to make yours any way
you’d like
[Music]
next we can take our floor flange and
line it up with the hole that we just
marked and then take our pencil and go
ahead and mark the rest of the four
holes then once we’ve got our four holes
marked we can then drill them out using
a drill in a small drill bit at this
point you could go ahead and assemble it
but I chose to spice mine up a bit by
rounding the corners and then using a
torch I lightly burn the wood surface to
give it a cool natural rustic look but
you can skip this step you can stain the
wood you can paint it or do whatever
you’d like the possibilities are endless
it’s yours feel free to make it however
you’d like but I chose this wood burn
technique because as long as you have a
torch it’s free it looks awesome and you
don’t have to wait for any paint or
anything to dry shout out to my buddy
Mike at the lost coal for teaching me
this trick
I then took the six-inch piece
clamp in the vise and cut off about one
inch I then took it to my grinder and
rounded and smooth the edges and now we
can put it together I like to use a drop
of wood glue just to help anchor the
screws a bit align the floor flange and
then screw it into place but don’t over
tighten it and then it’s just a simple
matter of threading your pieces together
and now you’re done
and there you go
super simple cheap effective stylish and
it has that cool industrial look to it
and it only costs around twenty dollars
and now I don’t got to worry about Frank
knockin my bike over anymore
plus it’s fun to be creative and make
your own stuff let me know what you guys
think and if you guys like this video go
ahead and hit that like button and if
you really like this video hit that
subscribe button for more thanks for
watching
| # | Preview | Product | Rating | Price | |
|---|---|---|---|---|---|
| 1 |  | NETGEAR Wi-Fi Range Extender EX3700 - Coverage Up to 1000 Sq Ft and 15 Devices with AC750 Dual Band... | $42.08 | Buy Now |
Bicycle Stand Review
A bicycle stand is generally known as a rack and is a simple device to which bikes are securely attached for safe storage purposes. A bicycle rack can either be free-standing or it can be permanently fixed to the ground or a static object like a building.
Bicycle Racks usually consists of an upper frame (axle), a lower bracket, a swing arm, and a rack which are designed specifically for bikes. A bike rack’s upper frame is mounted on the axles while the lower bracket attaches to the frame using a chain. There are many types of bicycle racks. The most commonly used type of bicycle rack is a wheeled bicycle rack. This type of bicycle rack usually has two wheels on the upper part of its frame while its bottom part has a single wheel mounted on a fixed part.
A wheeled bicycle rack has one wheel that connects to the upper part of the frame while its bottom is connected to a fixed part. While wheeled bicycle racks usually have the use of wheels it can also be made from other materials like metal. Wheeled bicycle racks are commonly used on cars that do not allow wheeled ones in their car boot area.
In a wheeled bicycle rack, the wheels of the bicycle are fixed so that they are able to keep their distance from each other. The lower bracket of a wheeled bicycle rack often has a hook which is used to secure the bicycle and its rear wheel.
Some other types of bicycle racks are known as free-standing bicycles. Free standing bicycle racks are not mounted permanently on the ground. This type of bicycle rack can either be fixed to an object like a wall or can be attached to a pole on the side of a building or any flat surface.
You must choose the type of bicycle rack according to your convenience. If you have a lot of bikes to store then you should consider having a wheeled bicycle rack. If you only need a bike storage rack once in a while then you may consider having a free standing bicycle rack. There are many bicycle stands available in the market.
You can find them in different sizes so that you can easily store your bikes. You can choose between steel, plastic, aluminum, and wrought iron. Each type of bicycle rack has its own strengths and weaknesses.
Bicycle racks are very beneficial, especially if you don’t have much space. Bicycle racks can also save a lot of space in the car boot. When you want to take your bicycle with you everywhere then a bike rack can be perfect. They are also helpful when you need to keep the bikes away from direct sunlight. These stands can also save your tires and save you the cost of repairing your bicycle if it gets damaged.
Bike Stand FAQ
Have you ever tried to fix your bike on a bike stand for repairs? It’s a great idea because it allows you to stay at the bike when you have some free time and not risk losing the money you’ve spent on it. Fixing your bike on a stand can make it easier to do some repairs or just help keep it off the ground if you are trying to ride with it off the ground. If you have the proper tools you can remove almost everything without even taking the bike off of the stand. Here are a few tips on how to do it right.
A bike repair stand for repairs is a piece of equipment that many professional bike mechanics use. You can try using something more simple like a screwdriver between wheel parts to loosen them up. After you remove the wheel parts from the frame you will need to use a screwdriver to pry off the clamps that hold down the chain. Then you just unscrew the clamps and the bike will come apart a little bit and then you can remove the wheel and get it out of the stand.
Most people don’t think about how important floor racks are in keeping their bikes upright and out of the elements when they are not being used. When you are fixing your bike to a bike stand for repairs, you need to make sure that it is set up properly so you can move it around and store it properly as well. There are plenty of racks that are designed to attach to the bottom of your bike which allows you to be able to fold your bike up and store it under your bed or in some closet if you do not have a rack. Many floor racks also have an umbrella holder built right in to them so you can protect your feet from the rain while riding.
The bicycle stands for garage is a very useful item. Especially if you have a small garage space and do not want to use it as an extra room for something that takes up space. However, you need to consider the cons before purchasing one, especially if you plan on using it for your bicycle. The pros and cons of the stand for garage that you purchase should be taken into consideration so that you will be able to get the best one.
One of the main pros of having this type of bicycle rack for your garage is that it is very effective. You can store all kinds of bikes and even your kids’ bikes with ease. This is because you can place the bikes on the rack while they are still on their wheels. This will allow you to move them around in a bit tricky situation like when you have to shift the bikes to another area of the garage.
Another one of the main pros of using this type of bike rack for the garage is that it is pretty cheap. The other pros of this bike rack include its strength and that you can easily install it without much effort on your part. However, this may not be enough for you if you do not have a strong and sturdy garage wall. This means that you may need another bike rack for the wall, such as a wall mount. You may also have to spend a bit more money in order to get this type of bike rack, but it would be worth the investment since you will not have problems with it.
Last update on 2023-01-13 / Disclaimer: as an Amazon Associate I earn from qualifying purchases.
3 verified buyer reviews
This is an excellent stand that is very flexible, light in weight, and lightweight when folded. I argued between this and some of the less costly options. However, in this price range, this was the only alternative that folded up. When you’ve got a bike on it, it’s really stable, and it’s fast and easy to set up and take down. I’m not sure if the plastics will withstand years of abuse; only time will tell. The clamp rotates 360 degrees, but rotating it while the bike is on the stand feels like it’s scratching up the plastic teeth. It would be difficult to find something similar to this good for this price. Please see the video for a more thorough analysis and demonstration of this stand.
This is a fantastic piece of equipment for safely holding your bikes upright. I’ve been using it for a few months now. It’s perfect for my road bike and mountain bike, both of which have 2.4″ thick tires.
Others have complained that their mountain bikes do not stay securely planted in the stand and/or that wider tires do not fit properly or get stuck. I haven’t had the problem of it not staying put — but I can imagine if you have a heavier bike and there’s even a little bit of sway it might tip over. My mountain bike is relatively small (24lbs), so this isn’t a problem. As others have said, the 2.4″ tires do get “stuck” in the bottom of the rack, but this isn’t a problem for me; I simply step on the arm of the rack while wheeling the bike out and it comes out without a hitch.
It Only Works for the Road Bike – no problems at all.
This bike rack is fantastic, and here’s why:
1) It leans against the wall and does not need any bolts or screws to keep it in place (although it comes with anchoring hardware).
2) It’s built because it leans against the wall and the more weight you place on it, the more stable it is against the wall. This bike rack is extremely durable.
3) Not sure where it’s made, but it’s very solid. The paint is thick, the arms are strong, and the rubber protectors are also thick. It feels very safe until the screws (which appear to be stainless steel) that hold it together are tightened.
4) It feels good to get the bikes off the ground. I have two bikes on this rack, and the bottom one’s tires are about 6-8 inches off the ground. That might not seem to be much, but keeping the tires elevated makes cleaning under the bikes much easier and more convenient.
5) The price is excellent.
6) Installation is easy and convenient.
* only verified buyers can leave a review.