Hydraulic Cutter vs. Bell’s 16mm Shackle Bicycle U-Lock
this is the lock-picking lawyer and
today I’m continuing my series of videos
testing bicycle locks against my 18 inch
hydraulic cutters in this video we are
stepping things up with the thickest
shackle tested to date this is the bail
catalyst 750 which I previously featured
in video number 671 there I showed what
it takes to pick it open if you’re
interested in seeing that video I’ll
leave a link to it in the description
below but today is all about brute force
now at 16 millimeters thick this shackle
is over 30% beefier than anything we’ve
tried thus far
however size isn’t the whole story the
shackles hardness is an important factor
in resisting these cutters and other
bail products I’ve tested really haven’t
impressed me in that category but
there’s only one way to tell for sure
how this lock will fare so let’s head
down to the garage and see what happens
ok we’re down in the garage so let’s get
this lock in the jaws of the cutter and
test out this 16 millimeter shackle ok
those blades are tight around the
shackle so let me zoom in just a bit to
give you a better view and get to
okay I think that might have just broken
yep and let’s check to see if this would
be enough to remove it from whatever
it’s locked to and it seems to be giving
me a difficult time let me yank on it
pretty good no I think we’d probably
have to cut this one twice I don’t think
that would be enough to remove this lock
okay let’s do it again
okay we’re back upstairs and this lock
turned out to be a mixed bag on one hand
the shackle despite its size really
didn’t put up much of a fight to the
however the locking mechanism did
provide enough resistance to twisting
that I had to cut the shackle twice that
of course doubled the delay time and
that’s really what we’re looking for
from a lock more delay in any case
that’s all I have for you today if you
do have any questions or comments about
this please put them below if you like
this video and would like to see more
like it please subscribe and as always
have a nice day thank you
|1||Master Lock Bike Lock Cable, Combination Bicycle Lock, Cable Lock for Outdoor Equipment, 8143D,Black...||$8.99||Buy Now|
Bell Bicycle Locks
A Bell bike lock can be used to prevent a thief from taking off with your prized asset. Bell is a trusted name in the security and theft prevention industry, and they manufacture the Bell bike locks, which are among the most advanced and secure bike locks on the market today. The Bell Lock Pro is a fully automatic four-digit preset combination lock that will not open with any other locks that are in existence, and it provides quick and easy access to the bike when you need it most.
When a thief gets away with your bike, what do you do? Most of them prefer to run away, but some of them will stop if they hear the roaring of the brakes on the bike as it slows down. You cannot let them catch their breath before they take off with your prized possession, no matter how you try. This is why Bell developed the Bell bike accessory alarm. The Bell alarm is a device that operates using an infrared signal and will sound the siren and flash lights if someone tries to force your bike from the parking area, regardless of whether the bike is locked or unlocked.
Some thieves are brave and will try to force open the front door of your bike with just a screwdriver. They might succeed for a short time, but more often than not, the alarm will not go off, and you will be caught in the act. In order to prevent this type of thievery, Bell developed the bike lock alarm. The Bell alarm system uses a hardwired system that securely latches onto the frame of the bike and emits the alarm. As soon as the alarm goes off, the hardwired alarm system springs into action, cutting off the thief and bringing you back piece of mind.
Bell also developed a lock that attaches to the frame of the bike and locks it with a keychain. When the key is turned on, the alarm system will sound a warning, and the lock will become locked. This is great for when you leave your bike in the car, or somewhere you don’t want other people to get a hold of it. You can also use the lock to secure your bike while you are parked or away from home.
One of the main causes of bike theft is through the use of a stolen bike. If you bike is stolen, Bell will alert you via phone call, text message, or email. This way, if you’re away from home, you don’t have to worry about riding your bike to work, instead you can use the built in security features on your Bell bike lock. You’ll also be notified if your bike is found and seized by the police.
Bell has gone so far as to develop a lock that is attached to the frame of the bike, rather than the handlebars. This allows the Bell bike lock to fit snuggly on the frame of the bike and prevents it from being moved during a theft. This is a great Bell bike lock to use with any motorcycle. The security it offers is unparalleled. Whether you’re looking for Bell bike locks that are hardwired to your bike, or wireless sensors, you should take a look at Bell’s line of products to find the best products for you.
Bell Bike Lock FAQ
Bell Kevlar bike locks are among the most popular and high quality locks on the market today. Bell manufactures a variety of different locks, but their bike lock is probably their strongest. They have been in business for many years and have a great reputation for making locks that are strong and durable. They are also among the best-known names in home security and are known for making alarms that sound when doors or windows are opened while providing multiple levels of security.
The main characteristic that sets Bell Kevlar apart from other brands is the material that they use to make their cable lock. A cable lock allows for greater security than a simple key on a bike. You can lock your bike with a single strong cable that extends all the way to the back wheel (which is why they call it a “full key lock”). This allows you to secure your bike quickly and locks it from both sides. You can open it from the front or back with the use of a special U-shaped keypad that allows you to enter a code using a keypad instead of a coin or card. This extra layer of security is provided by the Bell Company, who partnered with a well-respected company in Europe called KHS to produce this extremely robust lock.
As far as features go, Bell Kevlar offers a couple of different models: The Simplistic cable lock is designed to be opened with a key and is considered one of the easiest and best bike locks to work with. It offers dual locking systems, including a dial lock to prevent you from turning the knob all the way to the left to gain access; and a deadbolt lock, which means that even if you do manage to get in, the lock will not open. The Easytone lock is the lowest priced model and offers a single mode lock that is used in place of a key to allow you to lock and unlock your bike with a single touch. This lock also provides a number of other convenience features such as on/off warning lights and the ability to speak its alarm to stop it from being stolen.
Protect your favorite bike, skis, snowboard or skate boards with the Bell Sports Bike Lock. It features an anti-vibration pad that provides a high cut protection and anti-static shield. The anti-vibration pad has been strategically placed on the front of the frame to provide an extra layer of protection against vibration. The pad easily for storage in a backpack or under the seat. This model also offers easy attachment to most standard handlebars making it easier than ever to ride.
The Bell Motorbike Lock comes equipped with a key lock. No keys are required when storing your bike. This lock can be locked and unlocked with a universal key. The lock can also be locked and unlocked with a key, although you may need to replace the key that came with it. Some models have a secondary locking system that offers more security.
Bell is also the owner of the Bell GPS Bike Rider Key which can be used in conjunction with the lock to lock or unlock the bike. The GPS feature of the key gives you the ability to track your purchased item while keeping tabs on its current location. When you need to pick up the bike just lift the key and it will automatically lock and unlock itself. This is a useful feature especially for people who sometimes forget to lock their bike.
Bell bike lock reset devices, when properly installed, will ensure that your Bell bikes are safe and locked away from thieves and other risks. As with all Bell bike lock openers there are some important considerations to make when you are installing one of these devices to the locks on your bike. One of the main considerations is the location in which you will install the bell crank-style opener. If you intend to install it in the front wheel, then you will need to take this into consideration as these are typically more secure areas than the back wheel, although they may be a little less secure than if you were to install it in the back wheel.
To determine the best place for you to install your bell-style door lock, consider where you will be locking your bike to. If you plan to use it on the back wheel then it is advisable to secure the back wheel with a lock while you are considering the front wheel. On the other hand, if you plan to lock your bike on the front wheel, then it may be possible to install a lock in the back wheel while you are considering the front wheel. The decision to make will depend entirely on the security needs of your particular Bell bike, but most people find that placing a lock in the back wheel is the most secure.
When installing a bell-style bike lock, you should always refer to the instructions provided with your Bell bike to determine how to correctly position the bell crank-style opener. Remember that while these devices are easy to install, they can be quite difficult to remove once they have been mounted. If you remove your bike’s tires and unscrew the back wheel decals and handlebars, then you will need to carefully pull the bell off the frame in order to allow it to slide out, and then replace it.
Bell bicycles and other kinds of bikes are built with security in mind. But even these bicycles can be opened with a simple Bell bike lock key. Bell, Inc., the company that makes Bell bikes, developed the Bell lock to prevent unauthorized access to bicycles and their users. The Bell lock was designed so that the serial number, or “bracket,” on the stem of the bike is easily visible. While riders have the ability to see the serial number, they don’t have the easy accessibility to the lever which actually opens the lock.
To make sure that other people cannot access the bike, Bell locks its “master” lock trigger lock keyed alike with the serial number on all models. When the user inserts the key into the keyhole, the bike lock automatically opens, protecting your bicycle from strangers. However, if you need to make modifications to the bike, such as installing another set of wheels, or changing handlebars, then it will take a professional locksmith to open your bike.
If you do not want to go to a locksmith for your bike, then you can install the Bell bike share key blanks. Bell has developed a proprietary manufacturing process in which the blank happens to be installed in the same way that the master key in our bikes operates. If installed correctly, the key blank in Bell bicycles will be accessed through the same mechanism as the original. In this case, it would be much easier to gain access to your bike if you need to make changes, or install new tires, since the process of opening the bike is the same as it would be if you went to a local retailer to purchase the bicycle.
Last update on 2023-01-13 / Disclaimer: as an Amazon Associate I earn from qualifying purchases.