Getting to the heart of how to remove bike crank without puller can be easier than you think. You just need to know the right tools and you can do it yourself.

If you ever take a look at the frame of your bike, you will notice that your bike crank is located on the right crankarm. This is not where most people would look for it, and if you have a rusty crank, it is not very convenient to replace it yourself. Here are some tips on how to remove bike crank without puller.

Many bikers get confused with what to do with the bike crank on their bike. To remove it, all you have to do is a little tweak here and there.

Remove Cranks Without A Crank Puller

The crankcase will be removed when you unscrew the rear derailleur, which is basically the part that connects the rear wheel to the crank. This can easily be done by turning the front derailleur by hand. If you are unable to get this done yourself, have your mechanic come over and do it for you.

To take care of the crank, you should first clean it with water. If the crank seems to dirty easily, you can use compressed air to clean it, but that is a last resort. You can clean it with compressed air if you do not want to clean it with water.

Also, it is important to understand that you should not put any oil or grease into the crank itself. You should use clean water and soap. Just push down on the crank and make sure that the crank looks clean inside and out.

Once you get rid of the bike crank, you will find that you have a much better chance of getting your bike running smoothly. It is also important to replace it with the new one after you finish removing it so that you do not get stuck on an old rusty crank.

To remove the bike crank, you will need to remove the crank arms first. This is done by lifting them up and off the frame using the hands. The crankarms will then be unhooked from the bike’s frame.

To take care of the bike crank, all you have to do is to unscrew the rear derailleur, which is basically the part that connects the rear wheel to the crank. This can easily be done by turning the front derailleur by hand.

Once you get rid of the bike crank, you will find that you have a much better chance of getting your bike running smoothly. It is also important to replace it with the new one after you finish removing it so that you do not get stuck on an old rusty crank.

You should also pay attention to the chain in order to avoid getting into a chain repair problem when you have removed the crank. Make sure that you replace the chain with the new one after you have taken care of the bike crank.

Remember that getting to the heart of how to remove bike crank without puller is not hard at all. Just follow these simple steps and you will find that you will be able to save a lot of money in the long run.